Mold Remediation in DFW, TX
Contain, remove, and verify — mold remediation done to IICRC standards.
Pricing: Varies — call for estimate
IICRC-Certified
WRT · ASD · FSRT
24/7 Emergency Response
On-Site Within the Hour
Insurance Direct Billing
You Pay Your Deductible
Professional Mold Remediation
Mold grows when moisture goes unchecked — after a leak, a slow drip, or incomplete drying. Firewater Damage Restoration follows IICRC mold remediation standards: we contain the affected area under negative pressure, remove contaminated materials safely, clean remaining surfaces, and verify the remediation with post-remediation documentation. We also identify and address the moisture source so mold does not return.
The Mold Remediation Difference
IICRC Remediation Standards
We follow the IICRC S520 mold remediation standard for containment, removal, and clearance.
Containment & Negative Pressure
We isolate the work area under negative pressure so spores do not spread to the rest of your home.
Moisture Source Resolution
Mold returns if the moisture source remains. We identify and document the source so it can be resolved.
Post-Remediation Verification
We document that the remediation is complete and the area returned to a normal fungal ecology.
Our Mold Remediation Process
Moisture Assessment & Source Discovery
Mold follows moisture. Our IICRC-certified technicians use moisture meters and thermal imaging to map the affected area and locate the moisture source — a leak, condensation, or incomplete drying — and document both per IICRC S520 before any remediation begins.
Containment & Negative Pressure
We isolate the work area with critical barriers and establish negative-pressure HEPA filtration so mold spores disturbed during remediation cannot spread to unaffected areas of your home — a core IICRC S520 requirement.
PPE & Safe Material Removal
Our technicians work in full PPE per IICRC S520 standards, removing contaminated porous materials — drywall, insulation, carpet pad — and bagging them for safe, controlled disposal.
Surface Cleaning & HEPA Vacuuming
Remaining semi-porous and structural surfaces are HEPA-vacuumed and cleaned per protocol, then EPA-registered antimicrobials are applied where appropriate to suppress residual microbial activity.
Moisture Source Resolution
Mold returns if the moisture source remains. We document the source and coordinate the repair so the environment no longer supports growth — and the documented repair supports your insurance claim where the loss is covered.
Post-Remediation Verification
We confirm the remediation is complete with a visual inspection and documentation that the area has returned to a normal fungal ecology, and deliver the report to your adjuster. Where the mold stems from a covered sudden water loss, we coordinate with your carrier and bill covered work directly — you typically pay only your deductible.
Which Service Fits Your Needs?
Not sure which service is right for your situation? Use this quick comparison to find the best fit, then call us to start your claim.
| Service | Best For | Pricing | Turnaround |
|---|---|---|---|
| Water Damage | Burst pipes, appliance leaks, roof leaks, overflows | Insurance / deductible-based | Same-day response · 3–5 day dry |
| Fire Damage | Kitchen fires, electrical fires, partial losses, smoke damage | Insurance / deductible-based | Same-day response · varies by scope |
| Flood Cleanup | Storm flooding, rising water, overflow, backup | Insurance / deductible-based | Same-day response · 3–7 day dry |
| Mold Remediation | Visible mold, musty odors, post-water-loss mold, hidden growth | Varies — call for estimate | Varies by scope |
| Odor Control | Smoke odor, pet odor, biological odors, musty/moisture odors | Varies — call for estimate | Varies by source |
| Smoke Damage | Soot residue, smoke odor, ash deposits, post-fire cleanup | Insurance / deductible-based | Same-day response · varies by scope |
| Storm Damage | Wind damage, hail damage, fallen trees, storm water intrusion | Insurance / deductible-based | Same-day response · varies by scope |
| Sewage Cleanup | Sewer backups, toilet overflows, rising water, septic backup | Insurance / deductible-based | Same-day response · 2–5 day dry |
| Structural Drying | Post-extraction drying, wet framing, cavity drying, monitoring | Insurance / deductible-based | 3–7 day typical dry |
| Contents Pack-Out | Fire, water, or smoke-affected contents; clearing the work area | Insurance / deductible-based | Same-day response · varies by scope |
"Our water heater burst and flooded the hallway and two bedrooms at 11pm. Firewater was here within the hour, extracted the water, and had the drying equipment running that night. They documented everything for our insurance and the claim went smoothly. Lifesavers."
"A kitchen grease fire left soot all over the house and a terrible smoke smell. Firewater boarded up the damaged window, cleaned every surface, and ran ozone treatment. You would never know there was a fire. They worked directly with our adjuster the whole way."
"After the spring storms, water came in through the roof and ran down an interior wall. Firewater tarped the roof that same evening and started drying the next morning. The daily moisture reports made our insurance claim easy to get approved."
"Professional, fast, and thorough. The mitigation team explained the water category, mapped the moisture every day, and confirmed the structure was dry before they removed the equipment. Highly recommend Firewater."
"We had a sewage backup in the basement bathroom — gross. They came out fast in full PPE, contained the area, removed the affected materials, and sanitized. Felt safe letting them handle it. Insurance covered it and they billed the carrier directly."
"Firewater packed out our smoke-damaged contents, inventoried everything, cleaned what could be saved, and stored it until the rebuild was done. When they brought it all back it was clean and organized. Above and beyond."
"Mold in a guest bathroom closet from a slow leak. They contained the room under negative pressure, removed the affected drywall, and verified it was clear before closing up. No more musty smell. True professionals."
"Firewater was prompt, certified, and very well equipped to handle our water loss. The whole process from emergency response to dry standard was smooth from start to finish, and the documentation made the claim painless."
Mold Remediation FAQs
Is mold dangerous?
Some molds can affect indoor air quality and sensitive individuals. Regardless of type, visible growth indicates a moisture problem that should be addressed. We remediate per IICRC standards.
Does insurance cover mold remediation?
It depends on your policy and the cause. Mold resulting from a covered sudden water loss is often covered; mold from long-term neglect typically is not. We document thoroughly to support your claim.
How do I know if I have hidden mold?
Musty odors, recent water damage, discoloration on walls or ceilings, or persistent allergy symptoms can indicate hidden mold. We assess and document the extent before beginning.
Why do you use containment during mold removal?
Containment under negative pressure prevents mold spores from spreading to unaffected areas during the remediation process.
Will the mold come back?
Mold returns only if the moisture source remains. We identify and document the source so it can be repaired, then verify the remediation is complete.
How long does mold remediation take?
It depends on the extent of growth and affected area. Most residential remediations take a few days; we give you a clear timeline after assessment.
Can I stay in my home during mold remediation?
Often yes, depending on containment location and scope. For larger or more sensitive remediations, temporary relocation may be recommended. We advise you during assessment.
Need Mold Remediation? Call Firewater Today.
24/7 emergency response. IICRC-certified, insured, and ready to help right now.